Print

Legal information

 Kremenchukgumotechnika websites – Legal Information

The following regulations apply to Kremenchukgumotechnika P.P.
The only legally binding version of this document is the English one.

English Version of Legal Information

Use of Website; Product Warranties

Information on this website may be changed or updated without notice. Kremenchukgumotechnika P.P. may also make changes in the products or services described in this information at any time without notice. Kremenchukgumotechnika P.P. make no warranty, express or implied, and assumes no liability in connection with the use of this website. Kremenchukgumotechnika P.P. are not liable for any direct, indirect, incidental, consequential or punitive damages arising out of your access to or use of this website, including but not limited to any viruses that may infect your computer equipment.

Kremenchukgumotechnika P.P.'s obligations and responsibilities regarding Kremenchukgumotechnika P.P. products are governed solely by the agreements under which they are sold. Kremenchukgumotechnika P.P. products are subject to the limited warranty and adjustment policies that Kremenchukgumotechnika P.P. may issue for its products from time to time. Nothing contained in this website modifies or limits such warranty and adjustment policies in any way.

The information on this website is provided on an "as is" basis for information purposes only. All warranties, other than the limitied warranty and adjustment policies issued by phoenix compounding technology gmbh from time to time, are hereby disclaimed, including the impled warranties of merchantability, fitness for a particular purpose and non-infringement.

Global Availability of Products

There may be information on this website about Kremenchukgumotechnika P.P. products not yet available in your country. Inclusion of such information on this website is not intended to announce product availability anywhere in the world. Consult with your local Kremenchukgumotechnika P.P. dealer or representative to learn more about future plans for products not yet available for you.

Links to Other Websites

Links to other websites are provided as a convenience to our users. These websites are entirely independent from and outside the control of Kremenchukgumotechnika P.P. Kremenchukgumotechnika P.P. make no representations whatsoever about any other website you may access through this one and accepts no responsibility for the content or use of such website.

Privacy

Unless personally identifiable information is voluntarily submitted, the only information Kremenchukgumotechnika P.P. collects from visitors to this website is the date and time of a visit, the pages visited, the name of the visitor's Internet service provider and the website that referred the visitor. We use this data to measure site activity, to generate statistics, and to improve the services and information provided by the website. Personally identifiable information which is voluntarily submitted is used only to fulfill the visitor's request or for the purposes indicated on the page where the information is requested. We never provide any information (personal or non personal) to any other company for that company's independent use.

Trademark and Copyright

The trademarks, service marks and logos (the "Trademarks") displayed on this site are the property of Kremenchukgumotechnika P.P. Nothing on this site should be construed as granting any license or right to the Trademarks without the express written consent of Kremenchukgumotechnika P.P. The unauthorized use of the Trademarks is strictly prohibited. Kremenchukgumotechnika P.P. aggressively enforces its intellectual property rights around the world to the fullest extent of the law.

Copyright © 2018 Kremenchukgumotechnika P.P. All rights reserved. All text, images, graphics, animation, videos, music, sounds and other materials on this website are subject to the copyright and other intellectual property rights of Kremenchukgumotechnika P.P. Kremenchukgumotechnika P.P. owns the copyrights in the selection, coordination and arrangement of the materials on this site. These materials may not be copied for commercial use or distribution, nor may these materials be modified or reposted to other websites.

Print

Purchasing and returns rules, compensations

Posted in ENGLISH

Purchase at retail

Buyers ordering goods at retail can immediately proceed to the formation of an order by adding goods to the shopping cart. To place an order, it is not necessary to register in advance on the site - the first registration is done automatically, it will be enough only to fill in the corresponding fields in the basket. You can see shipping cost and terms of payment, available for the amount for which the order done, in the cart.

Acquisition of small wholesale

Organizations and private entrepreneurs which wish to purchase products for an amount exceeding 2500 UAH (without VAT) should:

  • Get an actual small-wholesale price-list by sending a request to the address This email address is being protected from spambots. You need JavaScript enabled to view it., having enclosed in the letter registration certificates of the company and other requisites.
  • Make an order by codes KrPT-price-list in the format: code-quantity and to send it to the same above e-mail address.
  • To pay the invoice received in return answer. We work only by prepayment, regardless of the size of the contracting authority.
  • Send a copy of the power of attorney to receive the goods, specify the number of the "Nova Poshta" forwarder' branch (for Ukraine), provide other information necessary for the discharge of shipping documents.

Acquisition of large wholesale

Wholesalers discounts are offered depending on the purchased volumes. The dealer network is created with the aim of removing the load from the manufacturer's warehouse, reducing the number of direct customers, but in the same time - to increase sales of the enterprise's products. Therefore, the dealer purchases products by box-packings on conditions of FCA, creates own stock of the goods and sells them in smaller lots to shops, service stations or small wholesale buyers. To receive a substantial discount, a wholesale buyer is offered to purchase products for an amount that significantly exceeds the standard needs of autopart's shops or car service stations. The document "Wholesale discounts" where the wholesaler can independently choose the size of the discount and the size of the first batch is sent together with the small-wholesale price-list. Dealers form the order for the goods by filling in a special xls-file ("dealer-application") with current prices and available positions.

Export sales

The cost of products for export is calculated individually after dealing with a clear order. Prices on the website issued in foreign currency, therefore, are indicative. The cost is calculated, and the invoice (contract) is provided for payment within 1-2 working days. Ask for exact prices can be made by writting to the address: This email address is being protected from spambots. You need JavaScript enabled to view it..

Product Returns and Cash Compensation

All questions relating to the return or replacement of the goods are governed by the Law of Ukraine "On Protection of Consumer Rights". The buyer has the right to return the purchased goods of good quality no later than 14 days after receiving it, provided that it has not been used and has retained its presentation, consumer properties, labels. The goods must be returned in the same way as it was received by the buyer from the seller. The refund of the money paid for the goods is made not later than 7 days from the date of return of the goods. The goods of inadequate quality at the buyer's choice: must be either replaced by the seller with a similar product of good quality, or paid for it must be returned in the shortest time.

Print

Delivery

Posted in ENGLISH

List of international delivery companies we can easy work with:




Картинки по запросу fedex

 

Print

Technical information

Posted in ENGLISH

Classification of shaft seals

Radial oil-seal with a pressing spring, working at pressure falls 0,05-0,15 MPa is the most widespread type of sealings of shafts thereof to relative simplicity and low cost, small sizes, sufficient sealing ability and an opportunity of maintenance in contact with many mediums. These oil-seal's properties are defined by a successful embodiment in a small-sized design of advantages of elastomeric sealing and spring which has stable in all a temperature range parameters and is not subject to a strain ageing.

The basic designs of oil-seals we offer are

Rubber covered case

Open metal case

Type without dust lip: Type without dust lip:
oil-seal-din3760-type-A-RED  oil-seal-din3760-type-B-RED
   
Type with a dust-lip Type with a dust-lip
oil-seal-din3760-type-AS-RED   oil-seal-din3760-type-BS-RED

The following additional designations are used:

 KL - calibrated case
RD - clockwise rotation
RS - counter clockwise
 SF - special design
 X7 - flutes on outer diameter

Application of Oil seals

  • Used in hydraulic rams and mixers, valves, brake devices, clean rooms, conveyers and test equipment
  • Used in constantly moving equipment like cylinders, rotating or reciprocating shafts and cylinders
  • Bearing isolators are used for pumps, motors and gear boxes
  • Used in vehicles, automotives, power generation, industrial engines and transmissions
  • Water pumps
  • Crankshaft front
  • Camshaft
  • Valve stem
  • Steering
  • Crankshaft rear
  • Gear box front
  • Transmission front
  • Selector shaft
  • Speedometer
  • Gear box rear / transmission rear
  • Propeller shaft
  • Pinion / differential
  • Rear hub inner/ rear wheel inner / rear axle inner
  • Rear hub outer / rear wheel outer

Standards and other documents relating to radial shaft seals

DocumentTitle
 
ISO 6194/1-1982 Rotary shaft lip type seals - Nominal dimensions and tolerances
ISO 6194/2-1991 Rotary shaft lip type seals - Vocabulary
ISO 6194/3-1988 Rotary shaft lip type seals - Storage, handling and installation
ISO 6194/4-1988 Rotary shaft lip type seals - Performance test procedures
ISO 6194/5-1990 Rotary shaft lip type seals - Identification of visual imperfections
   
SAE J946-1989 Application Guide to Radial Lip Seals
   
RMA OS-4, 1984 Application Guide for Radial Lip Type Shaft Seals
RMA OS-7, 1982 Storage and Handling Guide for Radial Lip Type Shaft Seals
RMA OS-8, 1977 Visual Variations Guide for Rotating Shaft Seals
   
DIN 3760 Radial-Wellendichtringe (Radial shaft seals)
DIN 3761 Radial-Wellendichtringe fur Kraftfahrzeuge (Radial shaft seals for motor vehicles), Parts 1 to 15. This standard covers all aspects including vocabulary, material requirements and test methods.

Permissible speeds for spring-loaded seal lips where no pressure differential exists across seal in operation

Print

Pricing policy

Posted in ENGLISH

pricing

Ukraine, territorially located in a southeast part of the Central Europe, is related to those countries where high qualification level of workers combines with relatively low level of salaries. Power and raw materials also have smaller cost, than in West-European countries. At the same time, Ukraine makes airplanes and launch vehicles, ships and locomotives, lorries and autobuses, cars and motorcycles, computer and electronic equipment, precision instruments and agricultural machines, TV and wireless apparatuses, chemistry and textiles. Practically all parts of economy are presented in Ukraine.

Our factory is situated on industrial estate - in 7th kilometres from one of the leading industrial centers of the country - city of Kremenchug in which are manufacturing lorries and passenger cars,  wheel disks, road machines, railway vehicles, the electrotechnical equipment, chemicals and petroleum derivatives, carbon black, steel & die castings, tooling, concrete ties etc. The industrial baseline of the city's factories has allowed to bring together at our factory skilled technicians: chemists, technologists, engineers, designers, tool makers, etc.

WTOKremenchukgumotechnika offers to the buyers oil-seals cheaper than European prices, saving at the same time high level of quality and sufficient profitableness of production. But the main mistake that European customers are going to see exact China in Ukraine by prices. It is impossible, and customers should seek in Ukraine abilities others, not only "lowest prices in the world". Also, manufacturing principles are not equal.

A border of EU is now near Ukraine: from 2008 Poland entered Shengen zone. From 5th February 2008 Ukraine is a member of WTO. During next years Ukraine has good perspectives to be integrated in EU. It is also a nearest country to EU from CIS-side. So, in next years it can become a new industrial platform for Western Europe. Cooperating with Ukraine can open big CIS market because of quite no customs fee between Russia, Belarus and Ukraine for products manufactured inside CIS. Here you can find hundreds of differences between local and world prices for energy, labor, lands, industrial goods, raw materials etc. Ukraine - is a democratic country, not like some CIS countries, it is friendly to Europe, so this is the most safe way to enter CIS market through Ukraine. But cooperation is possible only when sides are ready to see partners in Ukrainian companies. Because of Ukraine also has big local and CIS market with growing economy.

More about the economy of Ukraine you can read on page of World Trade Organization (WTO): http://www.wto.org/english/news_e/pres08_e/pr511_e.htm